The post How to Balance Your Pool’s PH appeared first on Klean Matters.

The post How to Winterize Pools appeared first on Klean Matters.

• For a new pool or for spring start up, superchlorinate with (64 to 128 oz.) on 10% pool shock or (52 to 104 oz.) on 12.5% pool shock for each 10,000 gallons of water to yield 5 to 10 PPM available chlorine by weight.  Check the level of available chlorine with a test kit.  Adjust and maintain pool water pH to between 7.2 to 7.6 and alkalinity between 50 to 100 PPM.
• To maintain the pool, make sure your pool pump is running, add manually or by a feeder device (13 oz.) on 10% pool shock or (11 oz.) on 12.5% pool shock for each 10,000 gallons of water to yield an available chlorine residual between 0.6 to 1.0 PPM by weight.  Stabilized pools should maintain a residual of 1.0 to 1.5 PPM available chlorine.  Test the pH, available chlorine residual and alkalinity of the water frequently with the appropriate test kits.  Frequency of water treatment will depend upon temperature and number of swimmers.
• Every 7 days, or as necessary, superchlorinate the pool.  Repeat directions above for new pool and spring start up.  Check the level of available chlorine with a test kit.  DO NOT enter pool until the chlorine residual drops below 4.0 PPM.

The post How to Disinfect Swimming Pool Water appeared first on Klean Matters.

The post How to Use Pool Antifreeze appeared first on Klean Matters.

The post How to Use on Mold, Mildew and Stain Remover for All Surfaces appeared first on Klean Matters.

The post How to Deodorize Garbage Cans appeared first on Klean Matters.

The post How to Sanitize Refrigerators, Freezers, Bathtubs and Showers appeared first on Klean Matters.

The post How to Sanitize Dishes, Glasses and Utensils appeared first on Klean Matters.

The post How to Disinfect Hard Non-Porous Surfaces appeared first on Klean Matters.

• Add ½ cup ammonia to 1-gallon warm water.
•  Scrub lightly and mop dry with clean water.

Windows and mirrors:

• Add ½ cup ammonia to 1-quart warm water.
• Apply with spray bottle, sponge or cloth

Odor removal:

• Place small dish of full-strength ammonia in desired location overnight.

Laundry:

• Add 1 cup of ammonia to washer load of sudsy water.
• Clothes and towels will wash cleaner and colors will be brighter.

Reusable Cloth Diapers:

• Add 1 cup ammonia to 1 gallon of mild, sudsy water.
• Soak
• Rinse thoroughly with water.

Fine Fabrics:

• Add ¼ cup ammonia to 1 gallon of mild, sudsy water.
• Soak
• Rinse thoroughly with water.

The post How To Use Ammonia for General Cleaning appeared first on Klean Matters.

• To clean and deodorize counter tops, garbage cans, garbage disposals, glass, mirrors, sinks and drains.
• Use full strength and allow to air dry.

For Your Bathroom:

• Removes hard water stains, odors and soap scum from stainless steel, ceramic, tubs, toilets and showers.
• Use full strength and allow to air dry.

For Odor Removal:

• Place small dish with a ½ cup of vinegar in desired location overnight.

For Laundry:

• Remove clothing stains by rubbing the stain softly with vinegar then launder as normal.
• To soften clothes, add 1 cup to final rinse.  Do not use on acetate fibers.

For Equipment:

• Cleans coffee machines, washing machines, humidifiers.
• Refer to manufacturers’ instructions.

The post How to Use Vinegar for General Cleaning appeared first on Klean Matters.

The post How to Use RV Antifreeze for General Winterizing appeared first on Klean Matters.